Alarm Function - Silvercrest KH 2029 Operating Instructions Manual

When the radio is switched off, select the display
mode by repeatedly pressing the
accordance with the following table:
Symbol on the screen display mode:
CLK only the time is displayed.
CITY the time and world time are shown
in succession.
DATE the time and date are shown in
succession.
the time, date and world time are
CIT DAT
shown in succession.

Alarm function

The world receiver provides two alarms that can
be set independently of one another, AL1 and AL2.
For both, you can set ...
... whether the alarm should operate on every
day of the week or only from Monday to
Friday;
... whether you wish to be woken by the alarm
tone or the radio.
Setting the alarm time
You can set two alarm times in your world receiver.
Alarm function
Acoustic signals
Radio
Switched off
VOL.+/AL–1
• Press the
The screen shows the most recently set alarm
time and the symbol for the alarm type.
UP DOWN
• Press the or
time forward or backward at minute intervals.
Hold down one of the buttons for a few sec-
onds to move the setting forward or backward
quickly at 10 minute intervals.
FINE
button in
Symbol on the screen
No symbol
VOL.–/AL–2
(or ) button.
button to move the alarm
VOL.+/AL–1
• Press the
the desired alarm function (see table above)
is indicated on the screen.
SNOOZE
• Press the
which you want the alarm to sound:
You can choose between week days
(Mo, Tu, We, Th, Fr), weekend (Su, Sa), every
day (Su, Mo, Tu, We, Th, Fr, Sa) or the current
day of the week. The selected setting is shown
on the screen.
SNOOZE
• Press the
days are set. Hold down the
the screen shows an individual week day.
SNOOZE
• Press the
day.
To go back to selecting week days, weekend or
every day, briefly hold down the
again.
MODE
• Press the
turn to the time mode. The setting is also saved
if you wait around 15 seconds until the screen
returns to displaying the time.
When the alarm sounds ...
• and the „Radio" alarm function has been
selected, the radio operates for one hour at
a predefined alarm volume. To switch off press
VOL.+/AL–1
the (or
• and the „signal sounds" alarm function has
been selected, the signal sound is played for
10 minutes. To switch off press the
VOL.–/AL–2
or button.
Note:
Please note that a station must be selected
(see below) for the radio alarm to work.
- 9 -
VOL.–/AL–2
(or ) button until
button to set the weekday on
button until the desired alarm
SNOOZE
button until
button to set the desired week
SNOOZE
button
button to save the setting and re-
VOL.–/AL–2
) button.
VOL.+/AL–1