Starting Up; Unpack The Device; Check Package Contents; Mains And Battery Operation - Silvercrest KH 2029 Operating Instructions Manual

Starting up

Unpack the device

Remove all packaging materials.
Caution!
Do not let children play with the plastic film.
There is a risk of suffocation.

Check package contents

When unpacking, ensure that the following parts
are included:
• world receiver
• these operating instructions with warranty card

Mains and battery operation

When you disconnect the radio from the mains
supply, any settings you may have made (time,
alarm, stations in memory) will be lost. If you wish
to keep these settings, insert batteries (see below)
before disconnecting.
Inserting batteries
Instead of using the mains adapter, you can run the
radio from batteries (not supplied). You will need
four 1.5 V mignon batteries, size AA, LR6.
• Open the battery compartment on the rear of
the device by sliding the cover downwards.
• Insert four batteries into the compartment,
paying attention to the polarity.
• Replace the cover on the battery compartment.
If the batteries are too weak, this is indicated on the
screen by a flashing symbol
Mains connection
•
•
Automatic time update
•
If an RDS signal is received, the time and date
are set automatically. The correct time will then
be shown on the screen.
If the time is not correct, set the date and time
manually as shown below.
Connecting headphones
On the left side of the radio, you will find the
headphone socket.
•
The speaker will be deactivated automatically.
.
- 5 -
Connect the plug of the mains adapter
DC INPUT 7.5 V
to the socket on the side of the de-
vice.
Plug the mains adapter into an easily accessi-
ble socket. To avoid tripping hazards, please
avoid using an extension cable.
Caution!
Only use an adapter with an output voltage of
7.5 V / 400 mA and check the polarity of the
device's plug (
ters with a different output voltage may result in
damage to the device or mains adapter.
As soon as the mains adapter is connected or
batteries inserted, the world receiver starts in
time mode. The screen repeatedly shows
PLEASE WAIT SYSTEM SETTING.
Insert the headphone jack plug into the
headphone output.
Caution!
Listening to music with headphones
over long periods of time and at a high
volume may damage your hearing!
). The use of adap-