Signtex Lighting Coverlite CVRAC Series Installation Instructions Manual

Coverlite Coverlite Coverlite Coverlite
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
LAMP HOUSING NUTS (4 REQD.)
BACKBOX
CONTROL BOARD
READ AND FOLLOW ALL SAFETY INSTRUCTIONS READ AND FOLLOW ALL SAFETY INSTRUCTIONS READ AND FOLLOW ALL SAFETY INSTRUCTIONS READ AND FOLLOW ALL SAFETY INSTRUCTIONS
Before connecting to power supply, TURN OFF ELECTRICAL Before connecting to power supply, TURN OFF ELECTRICAL Before connecting to power supply, TURN OFF ELECTRICAL Before connecting to power supply, TURN OFF ELECTRICAL
POWER AT CIRCUIT BREAKER OR FUSE POWER AT CIRCUIT BREAKER OR FUSE POWER AT CIRCUIT BREAKER OR FUSE POWER AT CIRCUIT BREAKER OR FUSE
Disconnect generator line AC power before servicing. Disconnect generator line AC power before servicing. Disconnect generator line AC power before servicing. Disconnect generator line AC power before servicing.
Refer to wiring diagram for proper connections. Refer to wiring diagram for proper connections. Refer to wiring diagram for proper connections. Refer to wiring diagram for proper connections.
All servicing should be performed by qualified personnel. All servicing should be performed by qualified personnel. All servicing should be performed by qualified personnel. All servicing should be performed by qualified personnel.
Consult your local building code for approved wiring and installation. Consult your local building code for approved wiring and installation. Consult your local building code for approved wiring and installation. Consult your local building code for approved wiring and installation.
Do not use outdoors. Do not use outdoors. Do not use outdoors. Do not use outdoors.
Do not use this equipment for other than intended use. Do not use this equipment for other than intended use. Do not use this equipment for other than intended use. Do not use this equipment for other than intended use.
Signtex Inc
220 VFW Avenue, Grasonville, MD 21638
TEL: (410) 827-- 8300 Fax:(410)827- 8866
sales@signtexinc.com www.signtexinc.com
NYLON SPACERS (4 REQD.)
ADJUSTABLE FOR
PANEL THICKNESS
POWER
SUPPLY
PANEL CUTOUT 9" X 6"
1
3 -STEP INSTALLATION
IMPORTANT SAFEGUARDS IMPORTANT SAFEGUARDS IMPORTANT SAFEGUARDS IMPORTANT SAFEGUARDS
SAVE THESE INSTRUCTIONS SAVE THESE INSTRUCTIONS SAVE THESE INSTRUCTIONS SAVE THESE INSTRUCTIONS
LIGHTING
Recessed Emergency Light Recessed Emergency Light Recessed Emergency Light Recessed Emergency Light
2 SNAP- IN
POLARIZED
CONNECTORS
LAMP HOUSING
FULLY ADJUSTABLE
MR16 LAMP
ASSEMBLY
¼- 1½"
HINGED REFLECTIVE
DOOR ASSEMBLY
2
Suitable for indoor damp locations.
Do not let power cords touch hot surfaces.
Do not mount near gas or electric heaters.
Mount and secure the fixture at a location and height
to avoid ready access and tampering by unauthorized
persons.
The use of accessory equipment is not recommended by
the manufacturer and may cause an unsafe condition.
Series CVRAC Series CVRAC Series CVRAC Series CVRAC
SOLENOID
FLEXIBLE
DOOR LINK
DOORS
ADJUSTABLE
THRU 90°
3
HIDDEN
MOUNT
SCREWS
2 REQD
R
2003529
REV 03.11.1