TEC FS-1450 Owner's Manual page 122

SALESPERSON CODE AND NAME PROGRAMMING (Submode 20)
By programming Salesperson Codes here, those codes may be used in sales entries. In addition, the
name of each salesperson can be programmed in maximum 12 characters.
Programming
CONDITION
Any time outside a sale
Mode Lock: SET
OPERATION
20 [X] | Salesperson Code | [ST]
Repeat for other salespersons.
NOTES: 1. A maximum of 12 regular-sized or 6 double-sized characters may be programmed for
a name. A combination of both types is also available.
2. Even if no name is programmed (i.e. skipping the Character Entries before the sec-
ond [ST] key) for a Salesperson Code, that code can be used in sale entries. Then,
auto-preset ID symbol "S P xx" (xx = Salesperson Code) will be printed instead of a
name on a receipt, etc.
ex.) To program the following Salesperson Codes and names:
Code Name
20 [X].
1 White 1 [ST] (Salesperson Code 1)
2 Stacy 2 [ST] (Salesperson Code 2)
3 Jansen 3 [ST] (Salesperson Code 3)
[AT/TL]
1 to 99
*
Mode Lock: SET
W
h
i
t
e [ST]
S
t
a
c
y [ST]
J
a
n
s
e
n [ST]
Character Entries
. .
.
See NOTE 1 below.
* For sequentially programming codes, the code
number specification can be skipped.
– 48 –
[ST] [AT/TL]
TEC STORE
1343 PEACH DRIVE
PHONE : 87-6437
Open 8:00am to 7:00pm
Closed : every Wednesday
12-19-1994 MON #1
P 2 0
01 White
02 Stacy
03 Jansen
0047
EO1-11097