Call No. Entry; Drive-Through Entry - TEC FS-1450 Owner's Manual

CALL NO. ENTRY

This operation is used to enter the call No. of order, and to print its No. on the receipt and the journal.
OPERATION
.....
(
NOTES: 1. Call No. entry is allowed any time during a sale.
2. Call No. entry is allowed any number of times during one sale.
• On receipt and journal, all the Call Nos. entered during one sale are printed.
3. Compulsion of Call No. entry can be programmed by the program option. In this case,
the sale finalization is not allowed unless entering the Call No.
4. Automatic creation of Call No. can be programmed by the program option. In this case,
the Call No. is automatically created when a department/PLU item is entered.
5. Call No. entry is unavailable when the drive-through option is selected.
Call No. Symbol
C A L L N O

DRIVE-THROUGH ENTRY

This operation is available only when the drive-through spec. is selected in the program option.
OPERATION
Same as
NOTES: 1. Order No. is automatically created when a department/PLU item is entered.
• Number of order tables
• Order No.
2. Entry of a department/PLU item causes an error while all the order tables have been
used.
) | CALL NO. | [CALL No.]
Max. 3 digits
011
Call No.
The lowest digit of the register No.
DEPARTMENT ENTRY
PLU ENTRY
SET MENU ENTRY
.....
Max.20
01 to 20
– 54 –
EO1-11097