Set Menu Table Programming - TEC FS-1450 Owner's Manual

SET MENU TABLE PROGRAMMING (Submode 42)
This submode creates the set menu tables for PLUs with set menu status programmed in PLU TABLE
PROGRAMMING (Submode No. 4). By entering the PLU programmed as a set menu PLU (main menu)
in this programming, the sub-menu items are entered automatically.
CONDITION
Any time outside a sale
Mode Lock: SET
OPERATION
42 [@/FOR]
NOTE: The main menu is also available with an open PLU.
ex.) To set the following Set Menu:
Table No.1
Main Menu PLU No. 5
Sub Menu PLU No.30 (VEGET. SALAD)
Sub Menu PLU No.40 (CORN SOUP)
Sub Menu PLU No.50 (COFFEE)
Mode Lock to SET, 42 [@/FOR] 1 [ST] 5 [PLU] 30 [PLU]
40 [PLU] 50 [PLU] [#] [AT/TL]
| Set Menu Table No. | [ST]
1 to 30
Repeat for other Set Menu Tables (max. 30 tables)
(BEEF STK SET)
| PLU Code | [PLU]
Enter the PLU Code of main
menu, then enter the PLU
Codes of sub menus.
Repeat for other item to be
contained.
(Max. 8 items including the Main
Menu.)
– 53 –
[#] [AT/TL]
TEC STORE
1343 PEACH DRIVE
PHONE : 87-6437
Open 8:00am to 7:00pm
Closed : every Wednesday
12-19-1994 MON #1
P 4 2
#01 000005
000030
000040
000050
0103
EO1-11097