TEC FS-1450 Owner's Manual page 137

NOTES: 1. For Tax 2, Tax 3, Tax 4 table programming, follow the same procedure in TYPE1,2, or
3 on the preceding page, using [TX2/M] or [TX3/M] or [TX4/M] instead of [TX1/M].
2. If multiple tax tables are programmed, the Tax 1 table must be set first, then Tax 2, Tax
3 and Tax 4. The Tax 1 table setting will automatically reset all of the old Tax 1,2,3 and
4 tables if they have been programmed.
3. No second depression of the [ST] key is allowed within one tax table programming.
4. A maximum of 99 breaks can be entered for Tax 1 to Tax 4 tables altogether.
ex. 1) TAX 1 FULL BREAKS
Tax Table
Amount Renge Tax Levied
$0.00 to $ 0.10 0¢
$0.11 to $ 0.22 1¢
$0.23 to $0.39 2¢
$0.40 to $0.56 3¢
$0.57 to $0.73 4¢
$0.74 to $0.90 5¢
$0.91 to $1.08 6¢
..... "A" Break
$1.09 to $1.24 7¢
$1.25 to $1.41 8¢
$1.42 to $1.58 9¢
$1.59 to $1.74 10¢
$1.75 to $1.92 11¢
$1.92 to $2.08 12¢
..... "B" Break
Key Operation
Mode Lock: SET
10 [TX1/M]
22 [TX1/M]
39 [TX1/M]
56 [TX1/M]
73 [TX1/M]
90 [TX1/M]
108 [TX1/M]
[ST]
124 [TX1/M]
141 [TX1/M]
158 [TX1/M]
174 [TX1/M]
192 [TX1/M]
208 [TX1/M]
[AT/TL]
– 63 –
TEC STORE
1343 PEACH DRIVE
PHONE : 87-6437
Open 8:00am to 7:00pm
Closed : every Wednesday
12-19-1994 MON #1
P 0 0
TAX1
00 $0.10
01 $0.22
02 $0.39
03 $0.56
04 $0.73
05 $0.90
06 $1.08
*
07 $1.24
08 $1.41
09 $1.58
10 $1.74
11 $1.92
02 $2.08
**
0058
EO1-11097