Table of Contents
Advertisement
Super X11SWN-H/-E/-L/-C User's Manual
2.2 Motherboard Installation
All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.
Phillips Screwdriver (1)
Tools Needed
1
JLPC80
JLCDPWR1
LVDS1
Location of Mounting Holes
Note: 1) To avoid damaging the motherboard and its components, please do not use
a force greater than 8 lb/inch on each mounting screw during motherboard installation.
2) Some components are very close to the mounting holes. Please take precautionary
measures to avoid damaging these components when installing the motherboard to
the chassis.
Phillips Screws (4)
HDMI
DP
USB2/3
JPT1:
1-2:ENABLE
2-3:DISABLE
CPU
X11SWN
REV:1.01
DESIGNED IN USA
JCOM2
COM3
JCOM1
COM1
COM2
24
Only if Needed
USB0/1
(3.1)
(3.1)
LAN2
JCOM3
I-SATA0
COM4
COM5
COM6
Standoffs (4)
FAN1
LAN1
JF1
JGP1
J2
JF1
PWR
ON
USB4/5
RST
HDD
LED
PWR
LED
USB6/7
JPH1
AUDIO
FP
Advertisement
Table of Contents
