Supermicro X11SWN-H User Manual page 32

Super X11SWN-H/-E/-L/-C User's Manual
Power Button
The Power Button connection is located on pins 1 and 2 of JF1. Momentarily contacting both
pins will power on/off the system. This button can also be configured to function as a suspend
button (with a setting in the BIOS - see Chapter 4). To turn off the power in the suspend
mode, press the button for at least four seconds. Refer to the table below for pin definitions.
Reset Button
The Reset Button connection is located on pins 3 and 4 of JF1. Attach it to a hardware reset
switch on the computer case to reset the system. Refer to the table below for pin definitions.
1
PWR
2
Reset
Power Button
Pin Definitions (JF1)
Definition
Pins
1 Signal
2 Ground
Reset Button
Pin Definitions (JF1)
Definition
Pins
3 Reset
4 Ground
1 2
Power Button
Reset Button
3.3V
3.3V Stby
7 8
Ground
Ground
HDD LED
Power LED
32
1. Power Button
2. Reset Button