Supermicro X11SWN-H User Manual page 50

Super X11SWN-H/-E/-L/-C User's Manual
TPM Enable
Use JPT1 to enable or disable support for the TPM module. Refer to the table below for
jumper settings.
SIM Detection
This jumper is for wireless WAN module detection. Since each wireless WAN module vendor
has a different condition of detection, check with the vendor for the correct detection type and
set the J2 jumper before installing the module.
1
1
HDMI
DP
JLPC80
JLCDPWR1
JPT1:
1-2:ENABLE
2-3:DISABLE
LVDS1
X11SWN
REV:1.01
DESIGNED IN USA
JCOM1
COM1 COM2
TPM Enable/Disable
Jumper Settings
Definition
Jumper Setting
Pins 1-2 Enabled (Default)
Pins 2-3 Disabled
SIM Dectection
Jumper Settings
Definition
Jumper Setting
Pins 2-4 High Active (Default)
Pins 4-6 Low Active
USB0/1 (3.1)
USB2/3 (3.1)
LAN2
CPU
JCOM2 JCOM3
COM3 COM4 COM5 COM6 I-SATA0
50
1. TPM Enable
2. SIM Detection
FAN1
LAN1
JF1
JGP1
2
J2
JF1
PWR ON
USB4/5
RST
HDD LED
PWR LED
USB6/7
JPH1
AUDIO FP