Table of Contents
Advertisement
Super X11SWN-H/-E/-L/-C User's Manual
A.1 BIOS Error POST Codes
During the POST (Power-On Self-Test) routines, which are performed upon each system
boot, errors may occur.
Non-fatal errors are those which, in most cases, allow the system to continue to boot. These
error messages normally appear on the screen.
Fatal errors will not allow the system to continue with bootup. If a fatal error occurs, you
should consult with your system manufacturer for possible repairs.
A.2 Additional BIOS POST Codes
The AMI BIOS supplies additional checkpoint codes, which are documented online at
www.supermicro.com/support/manuals/
When BIOS performs the Power On Self Test, it writes checkpoint codes to I/O port 0080h.
If the computer cannot complete the boot process, a diagnostic card can be attached to the
computer to read I/O port 0080h (Supermicro p/n AOM-SPI80-V).
For information on AMI updates, please refer to http://www.ami.com/products/.
Appendix A
BIOS Codes
("AMI BIOS POST Codes User's Guide").
98
http://
Advertisement
Table of Contents
