Operation; Operation Instructions; Safety Devices - HOLZMANN MASCHINEN HOB 260ECOLL User Manual

13

OPERATION

Device to be operated in a perfect state only. Inspect the device visually every time it is to be
used. Check in particular the safety equipment, electrical controls, electric cables and screwed
connection for damage and if tightened properly. Replace any damaged parts before operating
the device.
13.1

Operation instructions

Perform all machine settings with the machine being
Never switch the machine on while pressing the workpiece against the






13.2

Safety devices

Blade cover
Protects when planing workpieces touching the
rotating blade shaft.
Safety shutdown
When opening the planer table a limit switch is
activated which interrupts the power supply to
the power unit.
An unintentional start at opened planer table is
thus prevented.
Emergency switch
In case of danger or accident:
Push emergency switch

Power unit and feeder stop immediately
After eliminating the error and if there is no
risk:
Deactivate the emergency switch by turning

clockwise
The machine can be restarted
HOLZMANN MASCHINEN GmbH
W A R N I N G
disconnected from the power supply!
Check the blades of wear and change if it necessary
Operate the machine only with a connected dust collector!
Check the v-belt and tighten if necessary
Replace the v-belt if it is wear of
V-belts and pulleys must not come into contact with grease, oil or
other lubricants
Loosen the v-belt if longer breaks are scheduled
www.holzmann-maschinen.at
A T T E N T I O N
blade shaft!
N O T I C E
36
HOB 260ECO(LL)