Ce Electromagnetic Compatibility (Emc) Conformity; Radio Equipment Directive (Red) Compliance (Europe) - Siemens SITRANS LR200 Compact Operating Instructions

Canada Installations only: Industry Canada (IC) rules
NOTICE
Use on a "no-interference, no-protection" basis
The installation of the LPR/TLPR device shall be done by trained installers, in strict
compliance with the manufacturer's instructions.
• The use of this device is on a "no-interference, no-protection" basis. That is, the user
2.2.1

CE Electromagnetic Compatibility (EMC) Conformity

This equipment has been tested and found to comply with the following EMC Standards:
EMC Standard
CISPR 11:2009 + A1:2010/EN
55011:2009 + A1:2010, CLASS A
EN 61326:2013
(IEC 61326:2012)
EN61000-4-2:2009
EN61000-4-3:2006 + A1:2008 +
A2:2010
EN61000-4-4:2004 + A1:2010
EN61000-4-5:2006
EN61000-4-6:2010
EN61000-4-8:2010
2.2.2

Radio Equipment Directive (RED) compliance (Europe)

Hereby, Siemens declares that the SITRANS LR200 is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU. The LR200 complies
with EN 302 372 for use in closed storage vessels, when installed according to the
installation requirements of EN 302 372, and may be used in all EU countries.
SITRANS LR200
Compact Operating Instructions, 05/2019, A5E46957579-AD
shall accept operations of high-powered radar in the same frequency band which may
interfere with or damage this device. However, devices found to interfere with primary
licensing operations will be required to be removed at the user's expense.
Title
Limits and methods of measurements of radio disturbance char-
acteristics of industrial, scientific, and medical (ISM) radio-
frequency equipment.
Electrical Equipment for Measurement, Control and Laboratory
Use – Electromagnetic Compatibility.
Electromagnetic Compatibility (EMC) Part 4-2: Testing and
measurement techniques – Electrostatic discharge immunity test.
Electromagnetic Compatibility (EMC) Part 4-3: Testing and
measurement techniques – Radiated, radio-frequency, electro-
magnetic field immunity test 2006 + A1:2008 + A2:2010.
Electromagnetic Compatibility (EMC) Part 4-4: Testing and
measurement techniques – Electrical fast transient/burst immunity
test.
Electromagnetic Compatibility (EMC) Part 4-5: Testing and
measurement techniques – Surge immunity test.
Electromagnetic Compatibility (EMC) Part 4-6: Testing and
measurement techniques – Immunity to conducted disturbances,
induced by radio-frequency fields.
Electromagnetic Compatibility (EMC) Part 4-8: Testing and
measurement techniques – Power frequency magnetic field im-
munity test.
Safety notes
2.2 Laws and directives
9