Installing/Mounting; Basic Safety Notes - Siemens SITRANS LR200 Compact Operating Instructions

Installing/mounting

3.1

Basic safety notes

Hot surfaces resulting from hot process media
Risk of burns resulting from surface temperatures above 65 °C (149 °F).
• Take appropriate protective measures, for example contact protection.
• Make sure that protective measures do not cause the maximum permissible ambient
Note
Material compatibility
Siemens can provide you with support concerning selection of sensor components wetted by
process media. However, you are responsible for the selection of components. Siemens
accepts no liability for faults or failures resulting from incompatible materials.
Unsuitable connecting parts
Risk of injury or poisoning.
In case of improper mounting, hot, toxic, and corrosive process media could be released at
the connections.
• Ensure that connecting parts (such as flange gaskets and bolts) are suitable for
Exceeded maximum permissible operating pressure
Risk of injury or poisoning.
The maximum permissible operating pressure depends on the device version, pressure
limit and temperature rating. The device can be damaged if the operating pressure is
exceeded. Hot, toxic and corrosive process media could be released.
Ensure that maximum permissible operating pressure of the device is not exceeded. Refer
to the information on the nameplate and/or in Technical data (Page 38).
SITRANS LR200
Compact Operating Instructions, 05/2019, A5E46957579-AD
CAUTION
temperature to be exceeded. Refer to the information in Technical data (Page 38).
WARNING
connection and process media.
WARNING
3
13