6. Remove the
SSD
7. Remove the
hard drive assembly
8. Remove the
system fan
9. Remove the
heatsink
10. Remove the
display assembly
11. Remove the
display bezel
Steps
1. Using a plastic scribe, gently pry the camera off the display back-cover and antenna assembly [1].
2. Disconnect the camera cable from the camera module [2].
3. Lift the camera module from the display back-cover and antenna assembly [3].
Installing the camera
Steps
1. Connect the camera cable to the camera module [1].
2. Using the alignment post, adhere the camera module on the display back-cover and antenna assembly [2].
Removing and installing components
69