Next steps
1. Connect the battery cable to the connector on the system board.
2. Replace the
base cover
3. Replace the
SD memory card
4. Follow the procedure in
WLAN card
Removing the WLAN card
Prerequisites
1. Follow the procedure in
2. Remove the
SD memory card
3. Remove the
base cover
4. Disconnect the battery cable from the connector on the system board.
Steps
1. Remove the single (M2x3) screw that secures the WLAN card bracket to the system board [1].
2. Slide and remove the WLAN card bracket that secures the WLAN cables [2].
3. Disconnect the WLAN cables from the connectors on the WLAN card [3].
4. Lift the WLAN card away from the connector [4].
after working inside your computer
before working inside your computer
Removing and installing components
19