Next steps
1. Replace the
display assembly
2. Replace the
hard drive assembly
3. Replace the
VGA daughterboard
4. Replace the
system fan
5. Replace the
WLAN
6. Connect the battery cable to the connector on the system board.
7. Replace the
base cover
8. Replace the
SD memory card
9. Follow the procedure in
Power button
Removing the power button
Prerequisites
1. Follow the procedure in
2. Remove the
SD memory card
3. Remove the
base cover
4. Disconnect the battery cable from the connector on the system board.
5. Remove the
WLAN
6. Remove the
hard drive assembly
7. Remove the
system fan
8. Remove the
VGA daughterboard
9. Remove the
display assembly
after working inside your computer
before working inside your computer
Removing and installing components
55