Next steps
1. Connect the battery cable to the connector on the system board.
2. Replace the
base cover
3. Replace the
SD memory card
4. Follow the procedure in
Speakers
Removing the speakers
Prerequisites
1. Follow the procedure in
2. Remove the
SD memory card
3. Remove the
base cover
4. Remove the
battery
5. Remove the
M.2 SSD
Steps
1. Disconnect the speaker cable from the system board [1].
2. Unroute and remove the speaker cable from the routing guides on palm rest and keyboard assembly [2].
38
Removing and installing components
after working inside your computer
before working inside your computer