3. Replace the
base cover
4. Replace the
SD memory card
5. Follow the procedure in
Heat sink
Removing the heatsink - UMA
Prerequisites
1. Follow the procedure in
2. Remove the
SD memory card
3. Remove the
base cover
4. Remove the
battery
5. Remove the
hard drive assembly
6. Remove the
system fan
Steps
1. Loosen the four captive screws that secure the heatsink to the system board [1].
NOTE:
Loosen the screws in the order of the callout numbers [1, 2, 3, 4] as indicated on the heatsink.
2. Lift the heatsink off the system board [2].
Installing the heatsink - UMA
Steps
1. Place the heatsink on the system board and align the screw holes on the heatsink with the screw holes on the system board [1].
after working inside your computer
before working inside your computer
Removing and installing components
33