Trip Start - Carrier Transicold Vector Manual

Alarm Display / Reset
HEAT COOL DEFROST ALARM
SETPOINT
NO ACTIVE ALARMS
=
MANUAL
DEFROST
1
1
Press the ALARM LIST key. If there are no active
alarms in the alarm list, the display will say "NO
ACTIVE ALARMS" for 5 seconds.
If there are active alarms in the alarm list, the
2
2
display will be "A" and the alarm message for the
latest active alarm in the list for 5 seconds.
3 Press the ALARM LIST key to scroll through the list
3
of alarms.
4
When you reach the end of the alarm list, "LIST
4
END, = TO CLEAR ALARMS" is displayed.
5 To deactivate the active alarm list, press the = key
5
while "LIST END, = TO CLEAR ALARMS" is being
displayed.
CONTINUOUS
START-STOP RUN
LANGUAGE
STANDBY
BOX TEMPERATURE
ENGINE
1
START/RUN
ALARM LIST SELECT
START-STOP
!
CONTINUOUS
0 STOP

Trip Start

HEAT COOL DEFROST ALARM
SETPOINT
TRIP START ENTERED
=
MANUAL
DEFROST
1
1
To mark the start of a trip in the data
recorder, press the SELECT key until
TRIP START is lit.
2
2
Press the = key.
3
3 If trip start is acknowledged by the data recorder,
"TRIP START ENTERED" will be displayed for 5
seconds and then the display will revert back to the
normal display. Otherwise "CANNOT ENTER TRIP
START" will flash and then the display will revert
back to the normal display.
CONTINUOUS
START-STOP RUN
LANGUAGE
STANDBY
BOX TEMPERATURE
ENGINE
TRIP
1
START/RUN
START
ALARM LIST SELECT
START-STOP
!
CONTINUOUS
0 STOP