Auto-Start-Stop; Manual Operation - Carrier Transicold Vector Manual

Auto Start / Stop
HEAT COOL DEFROST ALARM
SETPOINT
START/STOP MODE SELECTED
=
MANUAL
DEFROST
1
1
2
2 Toggle the LANGUAGE switch as soon
as you select 1 of the 8 available
languages :
English - French - Spanish - German -
Danish - Dutch - Italian - Russian.
3 Press the START-STOP/CONTINUOUS key until
3
the START-STOP light on the controller
illuminates.
4
4
Verify that "START/STOP MODE SELECTED" is
displayed on the message center and that the
START-STOP light is illuminated.
CONTINUOUS
START-STOP RUN
LANGUAGE
STANDBY
BOX TEMPERATURE
ENGINE
1
START/RUN
ALARM LIST SELECT
START-STOP
!
CONTINUOUS
0 STOP
Place RUN/STOP switch
in RUN position.

Manual Operation

HEAT COOL DEFROST ALARM
SETPOINT
=
MANUAL
DEFROST
1
1
Place the ENGINE/STANDBY switch
to ENGINE.
2
Place manual GLOW/CRANK switch (
2
Glow and hold for 5 to 15 seconds.
3 While preheating place RUN/STOP switch
3
to RUN. "MANUAL START MODE SELECTED"
will appear in message center.
4
4
Place GLOW/CRANK switch in CRANK position
to crank and start.
Electrical box
(located inside
unit roadside
front door).
CONTINUOUS
START-STOP RUN
LANGUAGE
STANDBY
BOX TEMPERATURE
ENGINE
1
START/RUN
ALARM LIST SELECT
START-STOP
!
CONTINUOUS
0 STOP
MGC)
to
MGC