Connecting Via A Wireless Lan (Mf244Dw/Mf232W Only); Setting Wireless Lan (Mf244Dw/Mf232W Only) - Canon imageCLASS MF244dw Getting Started

Connecting via a USB Cable
Follow the MF Driver Installation Guide to connect the USB
cable.
Proceed to "Setting a Paper Size and Type" (P.13).
Connecting via a Wireless LAN
(MF244dw/MF232w Only)
Checking Before the Setup
Internet
Is the computer connected to the router (access point)
correctly by a LAN cable or wireless LAN?
For more information, see the instruction manual for the
network device you are using, or contact the networking
device manufacturer.
Have the network settings on the computer been
completed?
If the computer is not properly confi gured, you may not be
able to use the wireless LAN connection even after completing
the following settings.
NOTE
• You cannot connect both the wired LAN and wireless
LAN at the same time. In addition, the machine is set to
the "Wired LAN" by default.
• When you connect to an unsecured network environment,
your personal information could be disclosed to third
parties. Please use caution.
• If you connect through a LAN in the offi ce, contact your
network administrator.
Wireless LAN Router
Checking the Router
Select the connection method to the wireless LAN. Select from
the following two methods depending on the router (access
point) that you are using.
●
There is a button.
This machine supports WPS
(Wi-Fi Protected Setup). You
can easily set up if your router
(access point) has a button,
and if the mark is on the
router.
If you are not sure whether or not your router supports WPS,
please see the manual included in the product, or contact the
product manufacturer.
●
There is no button.
If there is no button on your
router (access point), you
may manually select SSID and
complete the settings. In this
case, you need to remember
SSID and network key of your
router (access point).
See "1 Check SSID or Network
Key for a Wireless LAN Router/
Access Point. " (P.12) to learn how to fi nd out your SSID and
network key.
To set up with the WPS PIN code method/To set up
manually:
User's Guide "Connecting to a Wireless LAN"
Setting Wireless LAN
(MF244dw/MF232w Only)
Push Button Mode
1
Press .
2
Select <Network Settings>, and then press
3
Select <Wireless LAN Settings>, and then press
If a screen appears asking whether to enable the wireless
LAN, select <Yes>, and then press
4
Read the message that is displayed, and then press
.
5
Select <WPS Push Button Mode>, and then press
.
Wireless LAN Settings
SSID Settings
WPS Push Button Mode
WPS PIN Code Mode
Power Save Mode
6
Select <Yes>, and then press
.
En
.
.
.
11