Rockwell RD2872 Manual

18v li-ion impact driver

Advertisement

RD2872
18V LI-ION IMPACT DRIVER
EN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RD2872 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Rockwell RD2872

  • Page 1 RD2872 18V LI-ION IMPACT DRIVER...
  • Page 2 RD2872...
  • Page 3 RD2872...
  • Page 4: Component List

    18V LI-ION IMPACT DRIVER COMPONENT LIST FORWARD/REVERSE ROTATING CONTROL ON/OFF SWITCH SOFT GRIP HANDLE BATTERY PACK * BATTERY PACK RELEASE BUTTON COLLET LOCKING SLEEVE CHARGER (SEE FIG. B) * Not all the accessories illustrated or described are included in standard delivery. ACCESSORIES b) Do not operate power tools in explosive atmospheres, such as in the presence of...
  • Page 5: Personal Safety

    18V LI-ION IMPACT DRIVER electric shock. c) Disconnect the plug from the power source and/ or the battery pack from the power tool before f) If operating a power tool in a damp location is making any adjustments, changing accessories, unavoidable, use a residual current device (RCD) or storing power tools.
  • Page 6: General Safety Warnings

    20. Charge only battery pack of the same model ADDITIONAL SAFETY INSTRUCTIONS FOR YOUR BATTERY provided by ROCKWELL and of models CHARGER recommended by ROCKWELL 1. Before charging, read the instructions.
  • Page 7 Negative terminal n) Recharge only with the charger specified by ROCKWELL. Do not use any charger other than that specifically provided for use with the equipment. A charger that is suitable for one type Do not burn of battery pack may create a risk of fire when used with another battery pack.
  • Page 8: Technical Data

    18V LI-ION IMPACT DRIVER TECHNICAL DATA Li-ion battery. This product has been marked with a symbol relating to ‘separate collection’ Rated voltage for all battery packs and battery pack. It No load speed 0-2300/min will then be recycled or dismantled in order Impact rate 0-3000/min to reduce the impact on the environment.
  • Page 9: Charging Indicator

    18V LI-ION IMPACT DRIVER 3) When charging is completed, the light will turn 2. REMOVING A BIT HOLDER, SOCKET OR SCREWDRIVER to green. The pack is now fully charged, unplug the BIT (See Fig. D) charger and remove the battery pack. Pull the collet locking sleeve forward.
  • Page 10: Maintenance

    18V LI-ION IMPACT DRIVER 8. PROTECTION AGAINST DEEP DISCHARGING The Li-ion battery is protected against deep discharging by the “Discharging Protection System”. When the battery is empty, the machine is switched off by means of a protective circuit: The inserted tool no longer rotates.
  • Page 12 POSITEC AUSTRALIA PTY LIMITED ABN 14 101 682 357 MADE IN PRC...

Table of Contents