Preparing To Use The Child Seat; Loosen The Shoulder Belts; Head Restraint; Carrying Handle - Mercedes-Benz BABY-SAFE plus II Operating Instructions Manual

Preparing to use the child seat

Loosen the shoulder belts

2
1
Press adjustment button 1 and
X
simultaneously pull shoulder belts 2 as
far forward as possible, then release
adjustment button 1.

Head restraint

G DANGER!
Before you place the child in the child seat,
make sure that the child seat is positioned
securely and cannot tip over. Make
adjustments to the head restraint of the
child seat when it has been removed from
the vehicle only with the help of a second
person in order to avoid the child seat
tipping over with a child in it.
The child may be injured if the child
restraint system tips over.
A correctly adjusted head restraint provides
optimum support and protection for your
child in the child seat.
By adjusting the head restraint, the
inclination of the backrest is simultaneously
adjusted to suit the child's age.
Preparing to use the child seat
Adjusting the head restraints
1. Loosening the shoulder belts; see page 9.
X
3
2. Tilt head restraint 3 forwards out of the
X
catch, push it to the desired height and
press it back into the catch.
Caution Adjust the head restraint so that the
shoulder belts are at the height of the child's
shoulders or slightly below.
3. Check the correct position of the head
X
restraint.

Carrying handle

Adjusting the carrying handle
Press gray release button 4 and push it to
X
the side. Swing carrying handle 5 to the
desired position until it engages.
9