Mercedes-Benz BABY-SAFE plus II Operating Instructions Manual page 22

Care instructions
20
Removing the seat covers
1. Loosening the shoulder belts; see page 9.
X
2. Press red button 6 and open the belt
X
buckle of the child seat.
3
27
3. Move head restraint 3 to the lowest
X
position; see page 9.
4. Tilt head restraint 3 forwards, unhook
X
the rubber band on the back of head
restraint 3 and remove the cover.
5. Open the press studs of shoulder
X
pads s and remove shoulder pads s.
28
29
6. Open press studs t on the left and
X
right sides of cover u.
7. Fold cover u down to the seat surface.
X
30
31
8. Unhook plastic eyes v and rubber
X
loops w of the cover from the hooks on
the underside of the child seat.
3
9
9. Thread the seat belt buckle and
X
adjustment belt 9 out of the cover.
10. Pull the cover up a little and pull it over
X
head restraint 3 with the opening.
Caution Avoid damaging the polystyrene
insert of the head restraint when removing
the cover.
Installing the seat covers
Seat covers are fitted in the same manner
but in reverse order.
Caution Make sure that the belts are not
twisted and that they are inserted into the
belt slots (arrows) of the cover correctly.
31