Memory Full; Remote Control Menu - Topcom DESKMASTER 125 User Manual

Deskmaster 125
cally a pause during playback. You can resume message playback by pressing "1".
6. After all messages have been played back, you will hear: "End of messages".
7. You have 10 seconds to activate another feature.
e.g. Press "0" to erase all messages. You will hear: "All messages erased".
8. To end remote control, press "3" or hang up.
CHANGING OGM BY REMOTE CONTROL
1. Dial your telephone number.
2. After a few rings your machine will answer your call and emit the OGM. Press
# to stop OGM playback.
3. Enter your security code.
4. As soon as you hear the waiting signal, press "7". You will hear: "Please record
announcement".
5. After the beep tone, say your new OGM.
6. When you have finished your new OGM, press "7" again.
7. The machine will play back your new OGM automatically for checking.
8. Press "3" or hang up if your new OGM is OK.

5.8. REMOTE CONTROL MENU

1. Dial your telephone number.
2. After a few rings your machine will answer your call and emit the OGM.
Press " # " to stop OGM playback
3. Enter your security code
4. Press "2" , you will hear all possible remote control commands.
5. After the menu, enter a number to start a function or press "3" to stop.
47
Deskmaster 125

5.9. MEMORY FULL

If the memory is full, "Fu" appears on the display. If a third OGM is registered the
answering machine automatically switches to "Answering mode without possibil-
ity to leave a message".
If no third OGM is registered the answering machine will only answer after 10
rings. You can command your answering machine by remote control and erase
messages.
Only if you have emptied the memory by erasing messages, your answering
machine will switch back to "Answering mode with possibility to leave a mes-
sage".
5.10. BATTERY
In case of a power failure, the answering machine is inoperative. The battery
saves the registered messages and settings. After the power failure has been
restored, your answering machine will operate as before again.
The battery can only save the registered messages and settings for a couple of
hours. If power failure lasts longer, these data will be lost and afterwards the
answering machine will switch to "Answering mode with possibility to leave a
message" with default OGM.
The answering machine is equipped with a detector which emits a warning sig-
nal when the battery is almost empty. In the latter case the selected OGM will
flash (An 1, An 2 or An 3 ). When the battery is still enough charged, the OGM is
lit permanently.
48