Page 3
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C NL De in deze handleiding beschreven mogelijkheden worden gepubliceerd onder voorbehoud van wijzigingen. Les possibilités décrites dans ce manuel sont publiées sous réserve de modifications. GB The features described in this manual are published with reservation to modifications.
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C INSTALLATIE TOETSEN/LED DISPLAY (LCD) WERKING Een taal instellen Aanmelden van een handset op een Butler 1000,1010,1210 basis Aanmelden van Butler 1210C handset op Butler 575/575+ & Cocoon100/100+ & Butler 2000 basis Telefoneren 4.4.1 Een externe oproep 4.4.2 Blokkiezen...
Page 5
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C 4.21 Een basis selecteren 4.21.1 Automatische selectie 4.21.2 Manuele selectie NUMMERWEERGAVE (CALLER ID/CLIP) Datum en tijd instellen De Oproeplijst Een nummer van de Oproeplijst oproepen Een nummer van de Oproeplijst in het Telefoonboek opslaan Nummers van de Oproeplijst wissen 5.5.1 Eén nummer wissen...
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C 1 INSTALLATIE Als u het toestel voor het eerst wil gebruiken, moet u er eerst en vooral voor zorgen dat de batterij gedurende 20 uren opgeladen wordt. Doet u dit niet, dan werkt het toestel niet optimaal.
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C Symbool display ( - dit symbool betekent dat het toestel oproepen ontvangen heeft die automatisch opgeslagen worden in de Oproeplijst. Symbool display ( - dit symbool betekent dat de mute-functie geactiveerd is, de microfoon is uitgeschakeld tijdens een gesprek.
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C 4.2 Aanmelden van een handset op een Butler 1000, 1010, 1210 basis Om te kunnen telefoneren en oproepen te kunnen ontvangen, moet een nieuwe handset aangemeld worden op de basis. De onderstaande procedure is enkel geldig voor een Butler 1000, 1010, 1210 handset en...
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C • ‘BASIS _’ (BASE _) verschijnt op de display. • Geef een nummer van de basis in die u aan de handset wil aanmelden (1-4). Gebruik hiervoor het cijferklavier. • ‘ZOEKEN’ (SEARCHING) en het symbool •...
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C 4.4.4 Terugbellen van één van de 5 laatst gevormde nummers • Druk op de Herkiestoets . Het nummer dat u het laatst hebt opgebeld, verschijnt op de display. Als u één van de 5 laatst gevormde nummers wil terugbellen, drukt u enkele keren op de Herkiestoets tot het gewenste nummer op de display verschijnt.
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C • Druk op de Lijntoets om de externe oproep aan te nemen. • Tijdens het gesprek verschijnen ‘EXT’ en het symbool begint te lopen. • Druk, na het gesprek, op de Lijntoets op de basis.
HANDL. B1200C/1210C Butler 1200C/1210C • Als de opgebelde handset wordt opgenomen, kan u een intern gesprek voeren. Druk op de Lijntoets en de externe oproep wordt doorverbonden. • Als de opgebelde handset niet opneemt, druk dan op de Omlaag-toets oproep terug aan te nemen.
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C 4.13 Conferentiegesprek (twee interne DECT handsets en één externe beller) U kan tegelijkertijd met één interne en één externe beller een telefoongesprek voeren. • Als u in gesprek bent met een externe beller, druk op de Programmeertoets •...
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C 4.15 Het Telefoonboek 4.15.1 Een nummer en een naam aan het Telefoonboek toevoegen • Druk op de Programmeertoets • Druk enkele keren op de Omhoog- of Omlaagtoets de display verschijnt. • Druk op de Programmeertoets •...
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C • Het eerste nummer van het Telefoonboek verschijnt op de display. • Druk op de Omhoog- of Omlaagtoets • Druk op de Programmeertoets • Druk op de Wistoets om de naam letter per letter te wissen en gebruik het alfanumerisch klavier om de correcte naam in te geven.
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C 4.17 Instellen van het belvolume van de handset Indien u wenst, kan u het belvolume van een binnenkomende oproep aanpassen. U beschikt over 10 niveaus. Het belvolume van interne en externe oproepen kan u apart instellen zodat u een verschil hoort.
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C 4.18.1 Instellen van een belmelodie voor externe oproepen (0-9) • Druk op de Programmeertoets • Druk enkele keren op de Omhoog- of Omlaagtoets verschijnt. • Druk op de Programmeertoets • ‘EXTERN’ (EXTERNAL) verschijnt op de display.
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C • Druk op de Omhoog- of Omlaagtoets • Druk op de Programmeertoets 4.20 Toetstonen aan-/uitschakelen U kan het toestel zodanig instellen dat er een toon weerklinkt telkens als u op een toets drukt. • Druk op de Programmeertoets •...
Sommige functies kunnen niet functioneren zoals hieronder beschreven omdat het mogelijk is dat de basis deze functies niet ondersteunt. Hieronder worden de functies besproken indien de handset is aangemeld op de Topcom Butler 1010 basis. (Deze dienst werkt enkel als u een abonnement hebt op CLIP- of nummerweergave. Raadpleeg hiervoor uw telefoonmaatschappij).
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C 5.1 Datum en tijd instellen Indien bij een binnenkomende oproep de datum en de tijd niet worden meegestuurd samen met het oproepnummer, kan men de de datum en de tijd van de binnenkomende oproep niet zien op de display.
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C • Als het nummer op de display staat, drukt u op de Lijntoets automatisch gevormd. (De symbolen duurteller loopt.) 5.4 Een nummer van de Oproeplijst in het Telefoonboek opslaan • Druk op de Omhoog-toets • Druk op de Omhoog- toets •...
Page 23
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C INSTALLATION TOUCHES/DEL ECRAN (LCD) FONCTIONNEMENT Sélectionner une langue Annoncer un combiné à une base Butler 1000, 1010, 1210 Annoncer un combiné Butler 1210C à une base Butler 575/575+ & Cocoon100/100+ & Butler 2000 Téléphoner 4.4.1 Un Appel externe 4.4.2 Sélection d'un bloc...
Page 24
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C 4.18 Sélectionner le type de sonnerie (mélodie) du combiné 4.18.1 Sélectionner un type de sonnerie (mélodie) pour les appels externes (0-9) 4.18.2 Sélectionner un type de sonnerie (mélodie) pour les appels internes (0-9) 4.19 Verrouillage du clavier 4.20 Activer/Désactiver les tonalités des touches...
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C 1 INSTALLATION Si vous utilisez l’appareil pour la première fois, vous devrez avant tout veiller à ce que la batterie soit mise en charge pendant 20 heures. Si vous ne le faites pas, le fonctionnement de l’appareil ne sera pas optimal.
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C Symbole écran ( ): - ce symbole signifie que le combiné se situe à portée de la base. - lorsque ce symbole se met à clignoter, cela signifie que vous vous trouvez hors de portée de la base. Rapprochez-vous de la base pour que la liaison entre la base et le combiné...
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C • Lorsque la langue souhaitée apparaît à l’écran, vous appuyez sur la touche de Programmation pour confirmer ou vous appuyez à plusieurs reprises sur la touche Mute/Effacer quitter le menu. 4.2 Annoncer un combiné à une base Butler 1000, 1010, 1210 Pour pouvoir téléphoner et recevoir des appels, il faut annoncer un nouveau combiné...
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C • Appuyez sur la touche de Programmation • L’écran affiche ‘BASE _‘. • Introduisez le numéro de la base que vous souhaitez annoncer au combiné (1-4). Utilisez pour cela le clavier numérique. • L’écran affiche ‘RECHERCHE’ et le symbole •...
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C 4.4.4 Rappel de l’un des 5 derniers numéros formés • Appuyez sur la touche Rappel l’écran. Si vous souhaitez rappeler l’un des 5 derniers numéros formés, vous appuyez à plusieurs reprises sur la touche Rappel •...
HANDL. B1200C/1210C Butler 1200C/1210C • Appuyez sur la touche Ligne • Pendant la conversation, l’écran affiche ‘EXT’ et le symbole conversation est enclenché. • Après la conversation, vous appuyez sur la touche Ligne ou vous posez le combiné sur la base.
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C • Introduisez le numéro du combiné auquel vous souhaitez transférer l’appel. • Lorsque le combiné appelé est décroché, vous pouvez avoir une conversation interne. Appuyez sur la touche Ligne • Si le combiné appelé ne décroche pas, appuyez sur la touche Descendre l’appel externe.
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C 4.12 Touche Pause Si vous formez un numéro de téléphone et si vous souhaitez ajouter une pause à ce numéro, vous appuyez sur la touche Pause Lorsque vous appelez ce numéro, cette pause (de 3 s) sera insérée automatiquement.
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C Caractères disponibles Activez les touches appropriées pour obtenir les caractères suivants : Touches Première pression ESPACE 4.15 Le Répertoire 4.15.1 Ajouter un numéro et un nom au Répertoire • Appuyez sur la touche de Programmation •...
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C • Appuyez sur la touche de Programmation • Le premier nom correspondant à ces lettres apparaît à l’écran. • Appuyez sur la touche Monter ou Descendre Répertoire. • Lorsque le numéro souhaité apparaît à l’écran, ce numéro sera automatiquement formé...
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C 4.16 Activer/désactiver le combiné 4.16.1 Désactiver le combiné Le combiné est activé. • Appuyez sur la touche de Programmation • Appuyez plusieurs fois sur la touche Monter ou Decendre ‘ARRET’ à l’écran. • Appuyez sur la touche de Programmation pouvez plus former de numéros, ni recevoir des appels.
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C • Appuyez à plusieurs reprises sur la touche Monter ou Descendre affiche ‘INTERNE’. • Appuyez sur la touche de Programmation • Appuyez à plusieurs reprises sur la touche Monter ou Descendre affiche ‘VOLUME’. • Appuyez sur la touche de Programmation •...
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C 4.19 Verrouillage du clavier Si vous verrouillez le clavier alphanumérique, il est impossible de former encore un numéro de téléphone. Vous ne pouvez plus utiliser que la touche de Programmation. L’écran affiche ‘CLV BLOQUE’. • Appuyez sur la touche de Programmation •...
Certaines fonctions ne peuvent pas marcher comme mentionné ci-dessous parce qu’il est possible que la base ne soutient pas ces fonctions. Les fonctions décrites ci-dessous sont au cas òu le combiné est annoncé à la base Topcom Butler 1010. 08:31 Page 41 jusqu’à...
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C (Ce service ne fonctionne que si vous avez un abonnement ‘CLIP’ ou ‘Affichage du numéro’. Consultez votre compagnie du téléphone à ce sujet) Lorsqu’on reçoit un appel, le numéro de téléphone de l’appelant apparaît sur l’écran du combiné.
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C 5.2 La Liste des appels Les appels reçus sont enregistrés dans la Liste des appels (max. 30 numéros). • Appuyez brièvement sur la touche Monter • Le nom de l’appel le plus récent est affiché à l’écran. Si aucun nom est disponible, l’écran affiche ‘SANS NOM’.
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C 5.5.2 Effacer tous les numéros • Appuyez sur la touche Monter • Maintenez la touche Effacer • Appuyez sur la touche de Programmation annuler. • Tous les appels sont effacés. 6 INDICATION VOICE MAIL Vous ne pouvez utiliser cette fonction que si vous disposez du service Voice mail ou Phone mail et si le réseau transmet cette indication en même temps que les informations concernant le...
Page 43
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C INSTALLATION KEYS/LED DISPLAY (LCD) OPERATION 4.1 Setting the language 4.2 Subscribing a handset with a Butler 1000, 1010, 1210 base unit 4.3 Subscribing Butler 1210C handset on Butler 575/575+ & Cocoon100/100+ & Butler 2000C base unit 4.4 Making Calls...
Page 44
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C 4.17 Setting the ring volume level on the handset 4.17.1 Setting the ring volume for external calls (0-9) 4.17.2 Setting the ringer volume for internal calls (1-9) 4.18 Setting the ringer melody on the handset 4.18.1 Setting a ringer melody for external calls (0-9)
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C 1 INSTALLATION Before you use the telephone for the first time, you must first make sure the battery is charged for 20 hours. If you do not do this, the telephone will not work optimally.
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C - when this symbol starts blinking, this means you are beyond the range of the base unit. Move closer to the base unit so that the connection between the base unit and the handset can be restored.
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C 4.2 Subscribing a handset to a Butler 1000, 1010, 1210 base unit In order to be able to make and receive telephone calls, a new handset has to be subscribed to the base unit. The underlined procedure is only applicable to a Butler 1000, 1010, 1210 handset and base...
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C • Press the Programming key • ‘PIN’ appears on the display. • Enter the 4-digit PIN code of the base unit (default PIN code is ‘1590’). Use the number keypad. • Press the Programming key •...
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C 4.4.5 Calling a programmed number from the Phone Book The telephone has a Phone Book in which you can program the telephone number of calls received by name. If you would like to call a number from the Phone Book, do the following: •...
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C 4.5.3 Receiving an external call during an internal call If you receive an external call during an internal call, you will hear a call waiting tone (double beep) on both handsets being used for an internal call.
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C During a call, you can change the volume as follows: • Press the Volume/Ringer key • The volume level currently set appears on the display. • Use the number keys to set the desired level (1-5).
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C 4.14 Using the alphanumeric keypad Use the alphanumeric keypad to type text. To select a letter, press the corresponding key. E.g. if you press the alphanumeric key ’5’, the first character (j) appears on the display. Press it repeatedly to select other characters from this key.
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C • You will hear a long beep. The name and the number are stored in the Phone Book. 4.15.2 Looking up a number in the Phone Book • Press the Programming key • Press the Up or Down key •...
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C • Press the Programming key 4.16 Turning the handset on/off 4.16.1 Turning the handset off The handset is turned on. • Press the Programming key • Press the Up or Down key • Press the Programming key numbers, nor receive any calls.
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C • The current volume level appears on the display. • Enter a number between 1 and 9 to select the desired ringer volume. Use the number keypad to do this. • Press the Programming key 4.18 Setting the ringer melody on the handset...
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C • The current status of the keypad appears on the display: - ‘LOCK’: the keypad is locked - ‘UNLOCK’: the keypad is not locked • Press the Up or Down key • Press the Programming key 4.20 Turning key click on/off...
Some functions will not work as described below because it is possible that the base doesn’t support these functions. The functions described below are in case the handset has been registered to the Topcom Butler 1010 base. (This service only works when you have a Caller ID/Clip subscription. Contact your telephone company).
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C By setting the date and time, they will be shown on the display, together with the telephone number, every time a call comes in ! • Press the Programming key • Press the Up or Down key •...
HANDL. B1200C/1210C 30-03-2001 Butler 1200C/1210C 5.4 Storing a number from the Call List in the Phone Book • Press the Up key to go to the Call List. • Press the Up key to look up the desired number. • Press the Phone Book key •...
Need help?
Do you have a question about the BUTLER 1200C and is the answer not in the manual?
Questions and answers