Fisher & Paykel RB2470BRV Installation Manual page 26

Removing the hanging brackets
1 Open the freezer door and remove the
top hanging bracket cover by drawing out
upwards.
2 Pull out the rulers from the
internal slots of the top hanging
bracket and turn the rulers
around.
Insert the rulers into the external
3
slots of the top hanging bracket
with the overhang of the rulers
pointing outward.
24
@0 INSTALL BOTTOM DOOR PANEL (CUSTOM)
Freezer door
Internal slots
External slots
4 Push the rulers down and close
the freezer door. Adjust the
rulers so that the top side of the
overhang of each ruler contacts
the bottom of the top door
panel. (A).
Top door panel
A
1/8" (3mm) gap
Side view
5 Open the freezer door. Remove the
two side adjustment nuts (B) on the
top hanging bracket using a spanner,
then remove the top hanging bracket
and rulers together.
– Ensure the rulers are kept
in place as you remove the
hanging bracket.
Top hanging
bracket
B
Freezer door