Fisher & Paykel RB2470BRV Installation Manual page 20

IMPORTANT!
Ensure to protect the finish of the Fisher & Paykel Stainless steel door panels.
● ●
Leave the protective film on the panels when hanging and remove the film only when the installation is complete.
● ●
Removing the hanging bracket
Open the refrigerator door and remove the top hanging bracket cover by drawing out
1
upwards.
Remove the two side adjustment nuts (A) on the top hanging bracket using a spanner,
2
then remove the top hanging bracket and rulers together.
– Keep the hanging bracket to reinstall later.
Repeat steps – for the freezer door.
1 2
18
!8 INSTALL DOOR PANELS (STAINLESS STEEL)
A
Refrigerator door
Top hanging
bracket
Refrigerator door