Table of Contents
Advertisement
Operation and Function
8.1.3
Bypass operation
WARNING
In bypass operation, the water supply is no longer
monitored.
Unplug the AC adapter (1) from the wall outlet or disconnect
the power supply.
In order to ensure a water supply during a power failure or
troubleshooting, the system can be deactivated for this period of
time.
The protective function is then no longer given!
The power supply must therefore be restored immediately after
troubleshooting.
CAUTION
Make sure that you use the same supply voltage for all
FlowTimer+ and FlowTimer+ Hubs.
03/19
FlowTimer+ Protect Set
19
Advertisement
Table of Contents
