Operation And Function; Operating Conditions; Normal Operation; Restarting The System - UseTECH FlowTimer+ Protect Set Operating Manual

Operation and Function

8 Operation and Function
8.1

Operating conditions


03/19
8.1.1

Normal operation

In the event of a fault, FlowTimer+ Protect separates the
consumer from the hot water supply by means of a
solenoid diaphragm valve.
The FlowTimer+ Protect operating status can be seen via the
illuminated bezel (5) (see chapter8.2 "Status display").
An operation of FlowTimer+ Protect is not necessary, because an
alarm as well as its resetting is done automatically by the upstream
FlowTimer+ systems.
8.1.2

Restarting the system

 Unplug the AC adapter (1) from the wall outlet or disconnect the
power supply.
 wait ten seconds
 Restore power supply
FlowTimer+ Protect Set 18