Getting Started - UseTECH FlowTimer+ Protect Set Operating Manual

Getting Started

7 Getting Started
03/19
WARNING
Electrical voltage can be life-threatening.
 The installation of a stationary power supply must be
carried out by a trained electrician.
The system must be commissioned and, if necessary,
adapted by a specialist. The local conditions must be
observed.
Air in the hot water supply, e.g. in the hot water storage
tank, can lead to scalding due to hot water running in if the
water supply is interrupted.
 Disconnect the power supply of the FlowTimer+ Protect from the
socket
 Establish water supply
 Venting and checking the cold and hot water pipes including the
hot water preparation and the heat exchangers
 Check consumer for visible leaks, watch out for traces of
limescale! (Toilet flushing, leaking taps, garden connections,
washing machines, dishwashers, etc.).
 Restore power supply
FlowTimer+ Protect Set 16