Assembly And Operation - Worx WX176 Manual

Warning
Wear ear protection
Wear eye protection
Wear dust mask
Do not expose to rain or water.
Do not burn
Wear protective gloves
8
Li-I on
Do not dispose of batteries, Return
exhausted batteries to your local
collection or recycling point.
Great torque
Small torque
Wood
Metal
Lithium-Ion Cordless Drill/Driver
High speed
Low speed
Waste electrical products must not
be disposed of with household
waste. Please recycle where
facilities exist. Check with your local
authorities or retailer for recycling
advice.
xINR18/65-y: Cylindrical lithium
Ion battery cells with max diameter
of 18mm and max height of 65mm;
"x" represents a number cells serial
connected, blank if 1; "-y" represents
a number of cells paralleled
connected, blank if 1.
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE
The machine is intended for drilling (including
pilot hole) in wood, metal and plastic as well as for
driving and removing fasteners.
ASSEMBLY AND
OPERATION
ACTION
BEFORE OPERATION
Removing the Battery Pack
Charging the Battery Pack
More details can be found in
charger's manual
Installing the Battery Pack
ASSEMBLY
Inserting the Bits
Removing the Bits
FIGURE
See Fig. A1
See Fig. A2
See Fig. A3
See Fig. B
See Fig. C
EN