Related Manuals for Worx WX174.1
Summary of Contents for Worx WX174.1
- Page 1 SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS Lithium-Ion Brushless drill driver WX174 WX174.1 WX174.2 WX174.9 Lithium-Ion Brushless hammer drill WX367 WX367.2 WX367.9...
- Page 4 100%...
- Page 6 WX174 WX174 : 1~15 WX367 WX367 : 1~18 WX367...
-
Page 7: Technical Data
* Not all the accessories illustrated or described are included in standard delivery. TECHNICAL DATA Type WX174 WX174.1 WX174.2 WX174.9 ( 1 - designation of machinery, representative of Cordless Drill) WX367 WX367.2 WX367.9 (3- designation of machinery, representative of Hammer Drill) -
Page 8: Noise Information
NOISE INFORMATION A weighted sound pressure : 81.4dB(A) A weighted sound power : 92.4dB(A) & K 3.0dB(A) Wear ear protection when sound pressure is over 80dB(A) VIBRATION INFORMATION Vibration total values (triax vector sum) determined according to EN 60745: Vibration emission value a =2.037m/s²... -
Page 9: General Power Tool Safety Warnings
ACCESSORIES WX174 WX174.1 WX174.2 WX174.9 WX367 WX367.2 WX367.9 Charger Battery Pack Double Ended Bit Hook Bit clip 158pc accessories We recommend that you purchase your accessories from the same store that sold you the tool. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice. - Page 10 drugs, alcohol or medication. A moment of d) Store idle power tools out of the reach of children and do not allow persons inattention while operating power tools may unfamiliar with the power tool or these result in serious personal injury. b) Use personal protective equipment.
-
Page 11: Drill Safety Warnings
“live” and could give the electrochemical systems separate operator an electric shock. from each other. n) Recharge only with the charger specified by WORX. Do not use any SAFETY WARNINGS FOR charger other than that specifically BATTERY PACK provided for use with the equipment. - Page 12 SYMBOLS To reduce the risk of injury, user Hammer drilling must read instruction manual Screwdriving Warning Drilling Wear ear protection Wood Wear eye protection Metal Wear dust mask Brick Wear protective gloves High speed Do not expose to rain or water. Low speed Do not burn xINR18/65-y: Cylindrical lithium Ion battery...
-
Page 13: Assembly And Operation
OPERATING INSTRUCTIONS NOTE: Before using the tool, read the instruction book carefully. INTENDED USE (FOR WX174 WX174.1 WX174.2 WX174.9) The machine is intended for driving in and loosening screws as well as for drilling in wood, metal and plastic. INTENDED USE (FOR WX367 WX367.2 WX367.9) The machine is intended for impact drilling in brick, concrete and stone as well as for drilling in wood, metal and plastic. -
Page 14: Problem Solution
OPERATING THE ON/OFF SWITCH WARNING: Do not operate for long periods at low speed See Fig. G because excess heat will be produced internally. LED LIGHT INDICATOR Before operation, the LED light will be activated when the On/Off switch is slightly depressed, and will automatically turn off 20 seconds after the On/Off switch is released. -
Page 15: Maintenance
Never use water or chemical Description Battery-powered Drill cleaners to clean your power tool. Wipe clean Type WX174 WX174.1 WX174.2 with a dry cloth. Always store your power WX174.9 ( 1 - designation of machinery, tool in a dry place. Keep the motor ventilation representative of Cordless Drill) slots clean. - Page 16 LITHIUM ION BATTERY Handle With Care. Do Not Load or Transport Package If Damaged. A Fire Hazard Could Exist. For more information, call: +86-512-65152811 www.worx.com Copyright © 2016, Positec. All Rights Reserved. AR01233201...