How To Use Shoulder Pad At Toddler Mode 21 - DAIICHI First7 Manual

How to use shoulder pad at Toddler Mode
Caution Shoulder pad for toddler should be used for the toddler mode only
1
Take off existing shoulder pad, put out shoulder belt from shoulder belt hanger of the backside.
From back of the safety seat, put shoulder pad for toddler into shoulder belt hole.
2
Advice
At this stage, put shoulder pad for toddler into shoulder belt hole that is similar in height of your baby.
Outer
side
(Refer to height adjustment of shoulder belt at Toddler Mode on p. 20)
As shown on the diagram,
if you insert shoulder pad with twisted side,
it will get through smoothly.
Stitched side should face ground.
Warning Rubber part should be closely attached to the baby.
Shoulder pad should be inserted into holes in the same height.
Caution
Front Back
Inner
side
As shown in the diagram,
insert the shoulder belt at the same level
as baby's shoulder or a little above.
Inner side
Outer side
(Refer to above diagram)
Shoulder pad has inner and outer sides.
☆
Cotton part is front and rubber part is back for shoulder pad.
☆
(For 9kg or above and forward facing)
Stitched side
21