How To Use Locking Lever - DAIICHI First7 Manual

How to use locking lever

Locking lever and belt guide are equipments for secure installment of child safety seat with car's seat
Danger belt. Please use it. If you do not use it, safety seat might be in danger, as it would not be tightened
up for shocks and abrupt stop.
Firstly, check if your car seat can install this child safety seat (refer to p.2 as some seats are not allowed
Danger to install this product). If you cannot install safety seat as shown in this manual, do not force it to fasten up.
In this case, the safety seat might not work properly and cause unexpected accident.
Caution When you adjust locking lever, please be careful not to jam your finger.
1
Fastening
Push the locking lever to the side.
3
For rear facing
As shown above, fix the belt with locking lever,
and then pull out the belt as much as possible
and hang it on belt guide
Unfastening
Locking lever is an equipment to securely install the child safety seat
into your car. Please use it.
You will find 2 locking levers, one on each side of the main body.
Please use it according to location of installment.
locking lever
1
Unfasten buckle of car's seat belt.
2
Pull shoulder part of car's seat belt to make it tight
as much as possible and insert it into locking lever.
Then, pull the lever to opposite direction and push to lock.
Shoulder belt of car
Belt guide
2
Push locking lever to the side
and then separate car's belt.
Locking lever
11