Types Of Seatbelts For Installation; Deciding Direction Of Safety Seat - DAIICHI First7 Manual

Types of seatbelts for installation

☆ First of all, please check the type of seat belt in the car.
Please use it only for 3-point seat belt that is approved by ECE NO16 or same regulation.
This safety seat cannot be equipped with 2-point seat belt.
Classification
ELR . ALR
In general, ELR belt will fix the safety seat, but if
you take out the entire belt, ALR function will be
3-point safety belt
started, which will be automatically fastened.
Belt fastening equipment
( )
Also, when all the belts are fastened, ELR
with safety seat installation
function will start.
function
ELR
In general, belt will fasten and unfasten freely,
3-point safety belt
but the belt will not move when it detects any
shock (such as sudden stop).
Automatic belt fastening
( )
equipment
ALR
If you stop your hand while taking out the belt,
3-point safety belt
the belt will be automatically locked up and will
not be pulled out.
Automatic belt fastening
( )
equipment
ELR
ELR safety belt without shoulder part.
Safety belt
NLR
No fastening option, but instead, adjust the
2-point safety belt
length of belt after pulling out the whole belt.
( Non-fastening belt )
A system that will automatically fasten up the
Automatic seat belt belt when the door is closed and unfasten
when the door is open.
NR
Safety belt without fastening function.
2-point safety belt
( manual )
All other types of seatbelt that are not stated in
All other seatbelt
this table.
For cars with airbags, children who weigh 13kg or under should be seated in the rear seat.
Danger
We recommend those children between 9 to 25kg to seat in the rear side as well.

Deciding direction of safety seat

☆ Choose direction of installation according to weights of children.
Range of child's
weight
Special features
birth ~ 13kg or under
Weight
9 ~ 25kg or under
Weight
Precautions for installation
Fasten the child safety seat firmly, and then
take out all the seatbelt to start ALR function.
Before starting installation, read
Caution
manual of the car.
Child safety seat should be tightly fastened
with locking lever.
In order to fix child safety seat, take out the belt
as much as required at once. Then, secure
child safety seat with locking lever.
Cannot install the child safety seat.
Cannot install the child safety seat.
Cannot install the child safety seat.
Cannot install the child safety seat.
Cannot install the child safety seat.
Possibility
of installation
Rear facing
( refer to p.16~18 )
Forward facing
( refer to p. 22~24 )
3