Troubleshooting - Black & Decker Firestorm FS1300CSL Instruction Manual

642742-00 01 FS1300 FS1500CSL
(provided that the store is a participating
retailer). Returns should be made within
the time period of the retailer's policy for
exchanges (usually 30 to 90 days after
the sale). Proof of purchase may be
required. Please check with the retailer for
their specific return policy regarding
returns that are beyond the time set for
exchanges.
The second option is to take or send the
product (prepaid) to a Black & Decker
owned or authorized Service Center for
repair or replacement at our option. Proof
of purchase may be required.Black &
Decker owned and authorized Service
Centers are listed under
"Tools-Electric" in the yellow pages of the
phone directory.
This warranty does not apply to
accessories. This warranty gives you
specific legal rights and you may have
other rights which vary from state to state
or province to province. Should you have
any questions, contact the manager of
your nearest Black & Decker Service
Problem
• Unit will not start.
For assistance with your product, visit our website www.blackanddecker.com for the
location of the service center nearest you or call the BLACK & DECKER help line at
1-800-544-6986.
TECHNICAL SPECIFICATIONS OF LASER:
Laser diode wavelength:
Laser Class:
Operating temperature:
Accuracy:
Imported by
Black & Decker (U.S.)
Inc.,
701 E. Joppa Rd.
Towson, MD 21286
U.S.A.
11/29/07 2:18 PM
Center. This product is not intended for
commercial use.
Free Warning Label Replacement: If
your warning labels become illegible or
are missing, call 1-800-544-6986 for a
free replacement.
Special Warranty Note to
Contractors:
FIRESTORM
offered as high end consumer home use
tools and carry a HOME USE
WARRANTY. These tools are designed,
manufactured and tested to meet or
exceed the needs of the do-it-yourselfer in
the execution of projects and repairs in
and around the home. With proper use
they will provide the home owner with
step up power and performance well
beyond their two year warranty. However,
if you use tools for a living and use
FIRESTORM
of Black & Decker's other Consumer
Home Use tools ON THE JOBSITE you
should know that they CANNOT BE
COVERED UNDER OUR WARRANTY.

TROUBLESHOOTING

Possible Cause
• Cord not plugged in.
• Circuit fuse is blown.
• Circuit breaker is tripped.
• Cord or switch is damaged.
633-670nm (red color)
IIIa
41°F (5°C) - 104° F (40°C)
+/- 1.8mm at every 300 mm
12
Page 12
TM
branded products are
TM
branded products or any
Possible Solution
• Plug tool into a working outlet.
• Replace circuit fuse. (If the
product repeatedly causes the
circuit fuse to blow, discontinue
use immediately and have it
serviced at a Black & Decker
service center or authorized
servicer.)
• Reset circuit breaker. (If the
product repeatedly causes the
circuit breaker to trip,
discontinue use immediately
and have it serviced at a Black
& Decker service center or
authorized servicer.)
• Have cord or switch replaced
at Black & Decker Service
Center or Authorized Servicer
See 'Tools-
Electric'
– Yellow Pages –
for Service &
Sales