Table of Contents
Advertisement
Quick Links
SMP10C24X220 Series
Power Supply/Charger
Installation Guide
Models Include:
SMP10C24X220
SMP10PMC24X220
- Single Output.
SMP10PM24P4220
- Four (4) Fuse Protected Outputs.
SMP10PM24P8220
- Eight (8) Fuse Protected Outputs.
SMP10PM24P16220
- Sixteen (16) Fuse Protected Outputs.
Rev. 012610
SMP10PM24P4CB220
- Four (4) PTC Protected Outputs.
SMP10PM24P8CB220
- Eight (8) PTC Protected Outputs.
SMP10PM24P16CB220
- Sixteen (16) PTC Protected Outputs.
More than just power.
TM
Advertisement
Table of Contents
Related Manuals for Altronix SMP10C24X220 Series
Summary of Contents for Altronix SMP10C24X220 Series
-
Page 1: Installation Guide
SMP10C24X220 Series Power Supply/Charger Installation Guide Models Include: SMP10C24X220 SMP10PMC24X220 - Single Output. SMP10PM24P4220 SMP10PM24P4CB220 - Four (4) Fuse Protected Outputs. - Four (4) PTC Protected Outputs. SMP10PM24P8220 SMP10PM24P8CB220 - Eight (8) Fuse Protected Outputs. - Eight (8) PTC Protected Outputs. -
Page 2: Specifications
Overview: Altronix SMP10C24X220 Series power supply/chargers convert a 220VAC (working range 198VAC - 256VAC), 50/60Hz input into a regulated 24VDC output with up to 10A of continuous load current (see specifications). SMP10C24X220 Series Power Supply Configuration Reference Chart: 220VAC 24VDC... - Page 3 PD4/PD4CB/PD8/PD8CB/PD16W/PD16WCB - Power Distribution Module: Terminal Legend Function/Description PD4/PD4CB PD8/PD8CB PD16W/PD16WCB 1P to 4P 1P to 8P 1P to16P Positive DC power outputs. 1N to 4N 1N to 8N 1N to 16N Negative DC power outputs. SMP10C24X220 Series - 3 -...
- Page 4 Distribution 220VAC Module(s) power mains AC FAIL Fig. 1b LOW BAT LED Diagnostics, pg. 3 C NO NC C --- BAT + --- DC + Optional Rechargeable Optional Rechargeable 12VDC Stand-by Battery 12VDC Stand-by Battery - 4 - SMP10C24X220 Series...
- Page 5 Distribution 220VAC Module power mains AC FAIL Fig. 2b LOW BAT LED Diagnostics, pg. 3 C NO NC C --- BAT + --- DC + Optional Rechargeable Optional Rechargeable 12VDC Stand-by Battery 12VDC Stand-by Battery SMP10C24X220 Series - 5 -...
- Page 6 9 10 11 12 13 14 15 16 1 2 3 4 5 6 7 8 outputs protected outputs Used on PTC Models For continuous protection against risk of fire replace fuses with same type and rating. 3.5A 250V - 6 - SMP10C24X220 Series...
- Page 7 Notes: SMP10C24X220 Series - 7 -...
- Page 8 Enclosure Dimensions (BC300): 13.5” x 13” x 3.25” (342.9mm x 330.2mm x 82.6mm) Enclosure accommodates up to two (2) 12VDC/7AH batteries. Also available to accommodate up to two (2) 12VDC/12AH batteries (please contact Altronix). 1.40” 4.85” 4.85” 1.40” (36mm) (123mm)
Need help?
Do you have a question about the SMP10C24X220 Series and is the answer not in the manual?
Questions and answers