Turning Answering Machine On Remotely; Troubleshooting - Topcom BUTLER 4850 User Manual

Topcom Butler 4850Twin/Triple/Quattro
d) Recording Outgoing Message
• Press '9' to select OGM 1 or OGM 2.
• Press '5' to start recording
• A beep will indicate that you can start recording.
• Say your message.
• Press '6' to stop recording.
Recording will be automatically interrupted after 2 minutes.
e) Turning Answering Machine On/Off
• Press the '9 ' key to switch on the answering machine.
• Press the '8' key to turn off the answering machine.
f) Ending Remote Operation
If you want to end remote operation, press '6'.

11.14 Turning answering machine on remotely

If the answering machine is switched off, you can turn it on remotely.
• Call your machine.
• The machine will pick up automatically after 10 rings and play outgoing message 2.
• Dial the VIP code (default 321) slowly during the message plays.
• Press the '9' key. A long beep will be heard.
• Press '6' to stop operation.

12 Troubleshooting

Problem
No Display
No dialling tone
Volume of conversation
partner too low
Handset ringer volume too low
Not possible to dial a number
22
Possible cause
Batteries not charged
Telephone cable not
properly connected
Wrong dial mode
Solution
Check the position of the
batteries
Recharge the batteries
Check the connection
of the telephone cable
Adjust the volume during the
conversation by pressing the
volume key
Adjust the ringer volume
See "Setting the dialling mode"
to set the correct dial mode
Topcom Butler 4850/Twin/Triple/Quattro