Prevue Hendryx F030 Quick Start Manual

Aviary Cage
Model: #F030
Instructions online at www.prevuepet.com
1
To assemble the BASE, you
will need these pieces:
× 4
( long screws )
2

To add the ROLLING CASTERS,

you will need these pieces:
× 4
F030 — 02 /17 — USL.1
Note: The tray/grill tracks at the
BACK stop efore the back leg.
Align the extended center wire
on the back panel with the hole
on the side panel frame leg.
Attach panels together with
a long hex screw at the bottom.
Leave the top screw out until
later in the assembly.
The rolling casters
can be added at any point
in the cage assembly.
Made in China for Prevue Pet Products, Inc., 224 N Maplewood Ave, Chicago IL 60612 USA • www.prevuepet.com • 1 [312] 243-3624 • customerservice @ prevuepet.com
read first
• TOOLS: An allen wrench is
included; You will need a pair
of sturdy pliers.
• A small bottle of touch-up
paint & brush are included
Complete the base assembly
in the same manner, attaching the
panels only at the bottom.
Carefully tip the cage
on its side.
REVIEW BEFORE ASSEMBLY
For assistance or replacement, please
contact Prevue:
TOLL-FREE 800.243.3624
ONLINE www.prevuepet.com
EMAIL customerservice@prevuepet.com
Fully insert the post
of the casters into
the holes in the base
of all four frame legs.
continued...