Weslo Pursuit G 2.8 User Manual page 6

1.
To make assembly easier, read the
information on page 5 before you begin.
Insert the Rear Stabilizer (6) into the Frame (1).
Attach the Rear Stabilizer with four M8 x 60mm
Button Screws (30).
2. Orient the Front Stabilizer (2) so that the large
holes are facing the Frame (1). Attach the Front
Stabilizer to the Frame with two M8 x 73mm
Button Screws (33).
3. Attach the Seat (12) to the Seat Post (5) with
four M8 Split Washers (42) and four M8
Locknuts (10). Note: The Split Washers and
the Locknuts may be preattached to the
underside of the Seat.
All manuals and user guides at all-guides.com
6
1
30
2
2
33
Large
Holes
3
12
42
10
5
1
6
1
42
42
10