Table of Contents
Advertisement
9. The Console (16) can use four AA batteries (not
included); alkaline batteries are recommended.
IMPORTANT: If the Console has been
exposed to cold temperatures, allow it to
warm to room temperature before inserting
batteries. Otherwise, you may damage the
console displays or other electronic compo-
nents. Remove the battery cover, insert the
batteries into the battery compartment, and
reattach the battery cover. Make sure to orient
the batteries as shown by the diagram
inside the battery compartment.
10. While another person holds the Console (16)
near the Upright (13), connect the console wire
to the Wire Harness (27).
Insert the wires downward into the Upright (13).
Tip: Avoid pinching the wires. Attach the
Console (16) to the Upright (13) with four M6 x
15mm Button Screws (46).
All manuals and user guides at all-guides.com
9
9
16
10
16
46
46
Batteries
Battery
Cover
Console
Wire
27
13
Avoid pinching
the wires
Advertisement
Table of Contents
