Assembly - Weslo Pursuit T 3.8 User Manual

All manuals and user guides at all-guides.com

ASSEMBLY

To hire an authorized service technician to assemble the exercise cycle, call 1-800-445-2480.
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the pack-
ing materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tool(s), assembly requires a Phillips screwdriver and an
adjustable wrench .
As you assemble the exercise cycle, use the drawings below to identify small parts. The number in parentheses
below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number
following the key number is the quantity needed for assembly. Note: Some small parts may have been pre-
assembled. If a part is not in the hardware kit, check to see if it has been preassembled.
M6 Curved
M4 Washer M6 Washer M8 Washer M8 Split
Washer (55)–4
(67)–2 (54)–4
(52)–8 Washer (42)–3
M4 x 5mm
M6 Locknut M8 Locknut M10 Locknut
Self-tapping
M4 x 8mm
(10)–2 (65)–2
(63)–4
Screw (66)–2 Screw (29)–2
M6 x 15mm Button M6 x 30mm Button M6 x 35mm Button M8 x 20mm Patch
Screw (46)–4 Bolt (64)–4 Screw (61)–8 Screw (34)–3
M10 x 60mm Patch Screw (33)–2
M10 x 75mm Carriage Bolt (30)–2
M8 x 125mm Bolt (62)–2
5