Table of Contents
Advertisement
1.
To make assembly easier, read the
information on page 5 before you begin.
Turn the Front Stabilizer (2) so that the large
holes are facing the Frame (1).
Attach the Front Stabilizer (2) to the Frame (1)
with two M10 x 60mm Patch Screws (33).
2. Attach the Rear Stabilizer (6) to the Seat Frame
(5) with two M10 x 75mm Carriage Bolts (30)
and two M10 Locknuts (65).
3. Insert the end of the Seat Frame (5) into the
Frame (1).
Firmly press the Frame Bushing (56) into the
Frame (1).
Attach the Frame Bushing (56) with two M4 x
5mm Self-tapping Screws (66). Then, tighten
the Adjustment Knob (9) into the Frame.
Carefully tip the exercise cycle onto its side.
Attach the two Bumpers (57) to the Frame (1)
with two M4 x 8mm Screws (29) and two M4
Washers (67). Then, tip the exercise cycle
upright.
All manuals and user guides at all-guides.com
6
1
2
33
Large
Holes
1
2
65
65
3
9
1
66
57
67
67
29
5
6
30
66
56
5
Advertisement
Table of Contents
