Wds Settings - Zonet ZSR1134WE User Manual

Disable WPS
Select the checkbox to disable WPS function, default setting is Enable.
WPS Status
Configured: means WPS feature is enabled and goes into effect.
UnConfigured: means WPS is not used.
Self-PIN Number： ： ： ： The PIN code used by default.
Push-Button Configuration
If you want to use PBC, you have to push a specific button on the wireless
client to start WPS mode, and switch ZSR1134WE to WPS mode too. You
can click PBC button in the web configuration interface to enable WPS
WDS Setting
In this mode, you can expand the scope of network by combining up to four
other access points together, and every access point can still accept wireless
clients.
All manuals and user guides at all-guides.com
27