Zonet ZSR1134WE User Manual page 8

3. Connect your xDSL / cable modem to the WAN port of ZSR1134WE by
Ethernet cable.
4. Please check all LEDs on the front panel. SYS LED should be steadily on, WAN
and LAN LEDs should be on if the computer / network device connected to
the respective port of ZSR1134WE is powered on and correctly connected. If
any LED you expected is not on, please recheck the cabling, or jump to
"Troubleshooting" for possible reasons and solution.
All manuals and user guides at all-guides.com
5