Zonet ZSR1134WE User Manual page 15

Gateway
ZSR1134WE is supposed to connect to Internet via ADSL/Cable Modem.
The NAT is enabled and PCs in four LAN ports share the same IP to ISP
through WAN port. The connection type can be setup in WAN page by
using PPPoE, DHCP client, PPTP client or static IP.
Bridge
All Ethernet ports and wireless interface are bridged together and NAT
function is disabled. All the WAN related function and firewall are not
supported.
Wireless ISP
All Ethernet ports are bridged together and the wireless client will connect
to ISP access point. The NAT is enabled and PCs in Ethernet ports share
the same IP to ISP through wireless LAN. You must set the wireless to
client mode first and connect to the ISP AP in Site Survey page. The
connection type can be setup in WAN page by using PPPoE, DHCP client,
PPTP client or static IP.
b. Time Zone
Time Zone
Select your time zone from the drop-down menu.
NTP Server
Manually assign time server address if the default time server does not
work.
All manuals and user guides at all-guides.com
.
12