Table of Contents
Advertisement
WDS Settings
In this mode, you can expand the scope of network by combining up to four
other access points together, and every access point can still accept wireless
clients.
WDS Mode:
Lazy Mode: You need to configure ZSR4134WE's BSSID into another
device, but don't need to input another device's BSSID in ZSR4134WE,
and they will connect together automatically.
Bridge Mode: You can wirelessly connect two or more wired networks
via this mode. In this mode, you need to add the Wireless MAC address
of the connecting device into ZSR4134WE's AP MAC address table or
select one from the scanning table. At the same time, the connecting
device should be in Lazy, Repeater or Bridge mode.
Repeater Mode: You can select the mode to extend the distance
between the two WLAN devices. Functioning as a WDS repeater,
ZSR4134WE connects to both a client card as an AP and to another AP.
In typical repeater applications, APs connecting to other APs equipped
with WDS functionality must also support WDS. In this mode, you need
to add the MAC address of the connecting device into ZSR4134WE's AP
MAC address table and the connecting client should be in Lazy, Repeater
or client mode.
Encrypt Type: You can select from WEP mode, TKIP mode, AES mode for
security here.
Pass phrase: Enter the key, the key format according to encryption you
selected.
AP MAC: Input the MAC address of another wireless router.
NOTE: Two wireless routers must use the same band, channel number, and security
setting.
All manuals and user guides at all-guides.com
29
Advertisement
Table of Contents
