Zonet ZSR1134WE User Manual page 24

All manuals and user guides at all-guides.com
Fragment Threshold
Specify the maximum size of packet during the fragmentation of data to
be transmitted. Default value is 2346.
RTS Threshold
When the packet size is smaller the RTS threshold, ZSR1134WE will not
use the RTS/CTS mechanism to send this packet. Default value is 2347.
Beacon Interval
The interval of time ZSR1134WE broadcast a beacon. Beacon is used to
synchronize the wireless network. Default value is 100.
Data Rate
For different requirement, you can select one of the suitable Basic Data
Rates. Default value is Auto.
Preamble Type
Long Preamble can provide better wireless LAN compatibility
Short Preamble can provide better wireless LAN performance
Broadcast SSID
Enabled: Every wireless station located within the coverage of
ZSR1134WE can discover it easily.
Disabled: Provide better security.
IAPP
Enabled IAPP allows wireless station roaming between IAPP enabled
routers within the same wireless LAN.
802.11g Protection
It also called CTS Protection. It is recommended to enable the protection
mechanism. This mechanism can decrease the rate of data collision
between 802.11b and 802.11g wireless stations. When the protection
mode is enabled, the throughput of ZSR1134WE will be a little lower due
to many of frame traffic should be transmitted.
21